中文
How to do a good job of cleaning after using the automatic glue filling machine?
Many customers in the purchase of automatic filling machine will often ask cleaning questions, the following is a summary for you, I hope to help you!
First, if the product you fill is always the same glue, the glue will not be changed in the middle. Because the product is not supplied in the middle and the glue in it has not been used up, it needs to be put aside for a few days. In these cases, the cleaning is very simple. If there is an automatic cleaning function, open the cleaning valve, press it in the operating system, and the machine will automatically clean If there is no automatic cleaning function, you only need to remove the dynamic mixing pipe on the double liquid automatic glue filling machine and put it into alcohol or detergent for cleaning. Some customers will ask, will other places be blocked if they don't clean it? This is not possible, because the two-liquid automatic glue filling machine, a glue and B glue are separated, and AB glue will only solidify after contacting. In the double liquid automatic glue filling machine, after the glue comes out of the material barrel a and B, the contact part is at the mixing pipe, and then the high-speed rotation of the motor drives the impeller in the mixing pipe to cut and mix the AB glue, so the contact part is only at the mixing pipe There is no contact in other places. All the glue will not solidify and block the pipeline. Moreover, the double liquid automatic glue filling has excellent sealing property and certain pressure maintaining function. Therefore, if you do not pour glue in the middle and the machine is placed there, it will not come into contact with the air, and there will be no chemical reaction. If you put it for a few days, there will be no problem.
Second, if you want to change the glue, or if the glue in the machine is not used up, and the next batch of products need to wait for more than half a month to use, then all the products should be cleaned, because different glue mixed together will cause a series of problems, such as glue poisoning, etc. If there is a one button cleaning function, the operation is relatively simple, press the cleaning key, the machine automatically completes. If the double liquid automatic glue filling machine does not have one key cleaning function, when cleaning, first drain the unused glue, and then put the organic solvents, such as Tianna water and industrial alcohol, into the machine; then press these organic solvents and glue together, and then blow them open with an air gun. With this type of machine, cleaning is very necessary. Otherwise, if it is not used for a long time, it will be very troublesome to solidify the glue in the rubber valve or in the barrel, and some accessories may have to be replaced. So every time you use it, you must remember to clean it.
If acetone is used to clean the machine, it is cheaper to use acetone to clean the machine. If there is no alcohol cleaning agent, it is cheaper to use acetone to clean the machine.
When cleaning the automatic glue filling machine: because the cleaning agent is some chemical solvent, it will have certain irritation to the skin and has certain smell. It is better to take waterproof gloves when cleaning and keep the workshop ventilated! Cleaning agent is easy to glow, flammable and explosive, do not smoke when using!
